1:350 DS9 Defiant 1:48 SHADO SkyDiver 1:350 Reliable Conversion 1:1000 Next Generation Star Ship 1:48 Millennium Falcon Custom Decal Printing CONTACT ME





Enterprise
making yesterday's tomorrows today












SHADO SkyDiver



These are the 3D files I used to to print the masters for a 1/48 scale resin model kit of the fabulous SkyDiver submarine-fighter plane combo from the 1969-70 Gerry Anderson TV show "UFO". This model is studio scale, the same size as one of the filming minatures used on the show. Though it's sized like the smaller studio model, it has many of the details of the larger version, which looks better, in my opinion. The Sky 1 jet was offered as a resin kit from 2018-2025. Diver was never offered as a resin kit. Instructions for the old Sky 1 resin kit can be seen here.

These files were originally made in the 2017-2018 time period. The Sky 1 files were cleaned up and slightly updated in February 2025 while the Diver files were refinished March 2026. Those who previously purchased my Sky 1 resin kit may notice some changes. For example,the nose section has been broken out into a separate part to accomodate a wider variety of resin printers. Also, grillwork has been added to the lower inlet. A few years back, I changed the muzzles of the guns, making the ends of the flash hiders a bit thinner, and some of the decals were altered to be more accurate. Those changes are carried over to this release. Lastly, a separate canopy section with integrated glass has been included for those who don't wish to fiddle with the individual panes and would prefer to print the whole piece in clear.

The Sky 1 set consists of 25 STL files and a decal sheet while Diver consists of 23 STL files and 2 decal sheets. For printing, the parts are designed to fit in a build volume of 218mm x 122mm x 200mm. Locating pins and tabs are included on many parts to aid in assembly.



1:48 SkyDiver 1 1:48 SkyDiver 2 1:48 SkyDiver 3 1:48 SkyDiver 4
1:48 SkyDiver 5 1:48 SkyDiver 6 1:48 SkyDiver 8
1:48 SkyDiver 10 1:48 SkyDiver 10 1:48 SkyDiver 11
1:48 SkyDiver 12 1:48 SkyDiver 13 1:48 SkyDiver 14 1:48 SkyDiver 15
1:48 SkyDiver 16 1:48 SkyDiver 17 1:48 SkyDiver 18 1:48 SkyDiver 19
1:48 SkyDiver 20 1:48 SkyDiver 21 1:48 SkyDiver 22 1:48 SkyDiver 23
1:48 SkyDiver 24 1:48 SkyDiver 25







The images below are pictures of prints I've done of the full SkyDiver model using these files. You can do these yourself by purchasing copies of my files or I may be able to print one for you. See details toward the bottom of the page.





1:48 SHADO 1 1:48 SHADO 2 1:48 SHADO 3 1:48 SHADO 4
1:48 SHADO 5 1:48 SHADO 6 1:48 SHADO 7 1:48 SHADO 8






The completed Sky 1 model measures about 11.5" x 9" x 4.5". A terrific build-up of my original resin kit, made from the original versions of these parts, by modeler John Payne can be seen here.

The complete Diver section measures about 17.25" x 10.25" x 9.5".

A decal placement guide for both sections can be found here.

Please be advised that this offering is meant for highly skilled modelers with the understanding that post-printing cleanup, processing and sanding/smoothing may be needed before the parts can be assembled.

Available to the United States, Canada, UK/Europe, Australia/New Zealand and Japan only.

If you don't wish to use PayPal or would prefer a credit/debit card or check/money order, please use the "Contact" link above to send me an email.

Within 24 hours of payment, I will email you a link to download the STL files and printed decal sheet(s) will be shipped out. Decals will be shipped in a flat-rate U.S. Priority Mail envelope. Unfortunately, It really does cost $40 more to ship these outside the U.S.


Please be sure your correct email and shipping addresses are included with your PayPal payment! If you don't hear from me within a day, check your email spam folder or use the "Contact" link above.





I can print both Sky 1 and full SkyDiver kits, time permitting. If you're interested in getting one, send me a message using the 'Contact' link above or subscribe to my mailing list to be notified when I periodically have them available.


Thanks for your interest!